Calculation method for the quantity of P6 outdoor LED display cabinets
Sometimes, we may want to roughly estimate the number of boxes and costs required for a project. Here is a good calculation method for your reference.
If we need to make a 60 square meter P6 outdoor LED display, how many cabinets are needed?
We generally choose a P6 LED cabinet with a size of 1152*1152mm. By dividing the total width and total height by the cabinet, we can get the number of cabinets.
Width: 10/1.152=8.6 pieces
High: 6/1.152=5.2 pieces
The number of boxes must be rounded up. Therefore, about 9 cabinets are needed for width and 5 cabinets for height. So for 60 square meters, 45 cabinets are needed. Since we obtain an approximate value, it may be slightly different from 60 square meters. If you need to achieve a more accurate size, you need to use a closer cabinet. The algorithm is the same.
If you need to know the price, you can get the price of all boxes by multiplying the number of cabinets by the price of a single cabinet.
P6 Outdoor LED Display Feature Introduce
The P6 outdoor LED display has a higher refresh frequency, the entire screen display is more delicate, and the overall visual effect is more shocking and gorgeous!
The P6 outdoor LED display uses Nationstar’s high-quality LED lamp beads and can be used for about 100,000 hours. If used 10 hours a day, it can be used continuously for 27 years.
The P6 outdoor LED display can bend two spliced cabinets to a certain extent. This method is suitable for some application scenarios with corners.
The P6 outdoor LED display has high brightness, which can attract the attention of pedestrians and effectively convey advertising information.
High-definition display effect presents a better advertising picture
As one of the main carriers of outdoor advertising communication, P6 outdoor LED display screen has many advantages, including high resolution, high brightness and high contrast.
- Under high resolution, it can ensure that the advertisement presents a good picture;
- High brightness ensures that people can be attracted to the picture from different angles;
- High contrast will make the screen image more delicate, thereby achieving better advertising effects.
Intelligent cooling system to better withstand high temperature environments
Outdoor LED displays will generate a certain amount of heat when working. Coupled with sunlight exposure, the temperature inside the screen will reach very high temperatures.
If the ambient temperature is high and heat dissipation is poor, it can easily cause the LED chips and integrated circuits to malfunction or even burn out.
JYLED P6 outdoor LED display is equipped with an advanced intelligent heat dissipation system, which can better withstand high temperatures. If the screen is not very large, there is no need to install an air conditioner.
P6 Outdoor LED Display Performance Introduction
The P6 outdoor LED display uses outdoor-specific waterproof modules and high-quality waterproof rings, which can prevent rainwater from penetrating into the interior of the screen to the greatest extent, thereby well protecting the internal circuits.
The outdoor P6 LED display uses environmentally friendly and energy-saving LED lamp beads, which can save energy more effectively. Moreover, the size of P6 is relatively moderate, so the price/performance ratio is also high.
The P6 outdoor LED display can be spliced according to needs to achieve ultra-high resolution. And because the P6 has a larger screen, it can better express the display quality.
The brightness and color consistency of the P6 outdoor LED display can reach 99%, the flatness is less than 0.1mm, and the splicing gap is less than 0.1mm, so the flatness is perfect.
- Gallery
- Outdoor LED Module Specification
Outdoor LED Display | ||||||
Model | P3 | P4 | P5 | P6 | P6 | P10 |
Module size(mm) | 192×192 | 320×160 | 320×160 | 192×192 | 320×160 | 320×160 |
Module resolution (dot) | 64×64 | 80×40 | 64×32 | 32×32 | 40×20 | 32×16 |
Scanning | 1/16S | 1/20S | 1/8S | 1/8S | 1/5S | 1/2S |
SMD | 1G1R1B | 1G1R1B | 1G1R1B | 1G1R1B | 1G1R1B | 1G1R1B |
Maintenance | Back | Back | Back | Back | Back | Back |
Installation | Back | Back | Back | Back | Back | Back |
Cabinet size(mm) | 960×960 | 960×960 | 960×960 | 960×960 | 960×960 | 960×960 |
Density(dot/㎡) | 111111 | 62500 | 40000 | 27777 | 15625 | 10000 |
Brightness(cd/㎡) | 4200-4500 | 5000-6500 | 5000-6000 | 5000-6000 | 4000-5000 | 6000-7500 |
Max. Power Consumption | 1000 | 900 | 800 | 800 | 800 | 1000 |
Average Power Consumption | 350 | 300 | 400 | 300 | 300 | 500 |
Cabinet weight (kg) | 40kg | 40kg | 40kg | 40kg | 40kg | 40kg |
Cabinet material | Iron | Iron | Iron | Iron | Iron | Iron |
IP rate | IP 65 | IP 65 | IP 65 | IP 65 | IP 65 | IP 65 |
Grayscale | 10000:1 | 10000:1 | 10000:1 | 10000:1 | 10000:1 | 10000:1 |
Refresh rate(hz) | 1920-3840 | 1920-3840 | 1920-3840 | 1920-3840 | 1920-3840 | 1920-3840 |
Frame change frequency | 50/60hz | 50/60hz | 50/60hz | 50/60hz | 50/60hz | 50/60hz |
Horizontal viewing angle | >140° | >140° | >140° | >140° | >140° | >140° |
Vertical viewing angle | >140° | >140° | >140° | >140° | >140° | >140° |
Best viewing distance | >3m | >4m | >5m | >6m | >8m | >10m |
Input Voltage | AC110V – AC220V | AC110V – AC220V | AC110V – AC220V | AC110V – AC220V | AC110V – AC220V | AC110V – AC220V |
Module Max. current | 4.5-5.5 | 5.5-7.5 | 5.5-7.5 | 3.5-5.5 | 5.5-7.0 | 8.0-10 |
Temperature-operating | ﹣10℃~60℃ | ﹣10℃~60℃ | ﹣10℃~60℃ | ﹣10℃~60℃ | ﹣10℃~60℃ | ﹣10℃~60℃ |
Humidity-operating | 10%~90% | 10%~90% | 10%~90% | 10%~90% | 10%~90% | 10%~90% |
Life span (H) | ≥100,000 | ≥100,000 | ≥100,000 | ≥100,000 | ≥100,000 | ≥100,000 |
MTBF (H) | >10,000 | >10,000 | >10,000 | >10,000 | >10,000 | >10,000 |
Project Type: Outdoor Advertising
Project Name: P6 Outdoor LED Display
Common Outdoor LED module series
Like the P6 LED display we introduce here, it is composed of LED panel P6.
P6 Outdoor LED Screen debugging process and operating instructions
The P6 Outdoor LED Screen has a high refresh rate and high grayscale, which makes the picture more realistic and meets the requirements of high visual quality for commercial use. It is displayed all-weather and adapts to various harsh outdoor environments; the whole screen has a good balance of display and can cover more than 75% of The naked eye color, up to more than 16 million colors;
Many customers do not know how to debug after installing the P6 Outdoor LED Screen? In fact, LED electronic displays are not high-tech, and installation and debugging are not as difficult as imagined! The following are some specific operations and usage instructions.
P6 Outdoor LED Display installation hardware steps:
- Insert the DVI display card into the motherboard AGP socket, and then set the driver;
- Insert the data card into the PDI socket on the motherboard (this is for users with data cards);
- Link the two controls DVI and AGP installed above together;
- Connect the control line to the serial port (Rs232)
- Connect to the receiving card with a network cable; the specific number is based on the engineering drawing)
- Check that the connection is correct, then you can set up or power on for debugging.
P6 Outdoor LED Screen software device:
The installation method is as follows:
1. Graphics card driver installation
Insert the graphics card driver CD into the optical drive to automatically enter the device state, just follow the prompts.
First install DirectX8.1 and then install the driver; finally install the control panel.
2. Play software
Install LED electronic display dedicated playback and setting software LED studio, or other LED screen control software.
Insert the application software CD attached with the screen into the CD-ROM drive, copy or install all the sequence to the computer.
3.debugging
After the debugging is completed, the P6 outdoor LED display is installed successfully!
How to calculate the resolution of P6 Outdoor LED Screen
The resolution of the P6 Outdoor LED Screen, similar to the resolution of a computer screen, is also an important indicator of the clarity of the display content, and it is also the number of vertical and horizontal dimensions in pixels.
So how to calculate the resolution of P6 Outdoor LED Screen? Since the display is a customized product, that is, the size of each LED screen may be different, so the same model of electronic display products will have different resolutions for the entire screen because of the size of the area.
For example, a full-color LED display with a unit length (usually 1 meter as a unit) of 100 dots, if 5 meters wide and 2 meters high, the resolution is 500×200, and the full screen resolution of 1 meter wide and 1 meter high is 100×100.
P6 Outdoor LED display resolution per square = 1/pixel pitch (in units of M) / pixel pitch (in units of M) Therefore: P6 per square resolution = 1/0.08/0.08=15625 DOT (dots)
Features of outdoor P6 LED display:
- The P6 outdoor display can be equipped with a light sensing control system, which can change according to the brightness of the outdoor environment and reduce your operating costs;
- JYLED’s P6 outdoor display uses a low-power solution, which can save 1/3 of the energy during operation of the display, further reducing your operating costs;
- The P6 outdoor LED display has a high refresh rate and high grayscale. When used outdoors, the picture is more realistic and meets the requirements of high commercial visual quality;
- The outdoor P6 LED display also has point-by-point brightness and color correction functions, which can make the LED screen display effect richer, thereby meeting the commercial requirements for high visual quality;
- The advertising content on the P6 LED electronic display can be switched at any time to accurately market different customer groups;
- The P6 outdoor LED display has a dual backup function, which means that when one computer has a problem, the other computer can automatically take over, ensuring that the display continues to work;
- The outdoor P6 LED display adopts an efficient optical fiber transmission system, which effectively reduces the signal delay caused by the long transmission distance, and ensures the consistency of picture playback;
If you still don’t know much about LED display products, and don’t know how to choose the model, please call our professional sales staff to talk about the relevant information about the full-color LED display installation you want to do.
We will try our best to recommend the best for you. The best production design plan, the reasonable choice of the LED display model, and the provision of cost-effective products, so that you can buy it economically and use it with confidence!
Although it can also be used indoors, due to the relatively large point spacing, the effect may not be delicate enough when viewed at a close distance.
The P6 outdoor LED display is an electronic product. When cleaning, you need to disconnect the power first, then use a small hand-held vacuum cleaner to suck away the dust, and then use an alcohol wipe to gently wipe some stubborn stains.
Since the pixel pitch of P6 outdoor LED display is relatively large, it is suitable for use in some large-scale outdoor advertising, stage construction, wedding scenes and other scenes.
The P6 outdoor LED display has a high brightness, which does not affect the viewing of the picture even under direct sunlight.
The P6 outdoor LED display is a customized product that usually takes a week to produce and about 20 days to transport, so you need to reserve enough time.